7 min read
Erik Bjornstad: Oct 13 2026
If you work for an electric, water, or wastewater utility, an emergency creates a somewhat unusual situation. For a lot of businesses, when the power goes out or a major storm comes through, operations may slow down or even stop. But utilities don't...
Read More
13 min read
Erik Bjornstad: Oct 13 2026
The monthly exercise ran clean for 20 minutes. Then the set started hunting under load, the stack went gray-black, and your technician pulled a...
11 min read
Erik Bjornstad: Oct 6 2026
The generator passed its monthly exercise three weeks ago. Then the utility dropped, the transfer switch closed, and two hours into the event the...
3 min read
Erik Bjornstad: Sep 24 2026
Maintaining today's stored backup fuels is a bigger job than it used to be. One major reason is that fuels themselves have changed. Ultra-low sulfur...
6 min read
Erik Bjornstad: Sep 15 2026
Fuel injectors that are clean and functioning properly are one of the most critical elements in getting good performance and fuel economy from a...
6 min read
Erik Bjornstad: Sep 8 2026
For fuel storage tanks full of sludge and fuels that are dark and subpar, fuel polishing is often recommended. There are probably a thousand entities...
8 min read
Erik Bjornstad: Sep 2 2026
As the years stretch out since ultra-low sulfur diesel (ULSD) became our reality between 2007 and 2010, more and more professionals are learning what...
11 min read
Erik Bjornstad: Aug 25 2026
For hospitals and other facilities operating under the CMS adoption of NFPA 99-2012, the referenced edition is NFPA 110-2010. In that edition, the...
8 min read
Erik Bjornstad: Aug 19 2026
If multiple generators draw from the same bulk diesel supply—or from separate tanks containing fuel of similar age and condition—fuel contamination...
9 min read
Erik Bjornstad: Aug 11 2026
Your generator fuel failed its annual ASTM slate, or the sample you pulled came up dark and hazy, and now you need a fuel polishing service. So you...
