Skip to the main content.
New call-to-action

Save with our Specials. Shop Now.

Save with our Specials. Shop Now.

Save with our Specials. Shop Now.

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast

Check out The Fuel Pulse Show Podcast
Check out The Fuel Pulse Show Podcast

2 min read

Steps to Prevent Fuel Contamination

Steps to Prevent Fuel Contamination
Steps to Prevent Fuel Contamination
3:38

Continuing our discussion about diesel fuel quality, the issue of diesel fuel contamination is a constant bug in the ear of fuel handling professionals, especially with how today's fuels are so much more prone to microbial contamination. Fuel is an investment that needs to be protected. Contamination of the fuel causes its value to go down by reducing the ability of the fuel to provide the work it normally provides through combustion in an engine.

Causes of Diesel Fuel Contamination

1. Biodiesel BLENDS

We start by recognizing that more and more entities are mixing biodiesel into their regular diesel fuel supplies. This increases the instances of harmful fuel contamination. Biodiesel oxidizes and breaks down more easily in the presence of oxygen. The reactions with the oxygen form peroxide that eventually forms acids in the fuel, leading to gums and resins forming. Once you have gums and resins in the fuel, you get the problem of blocked fuel filters.

2. Water

Water is another contaminant that is more prevalent with biodiesel than conventional diesel. People think that ethanol is the only biofuel with appreciable water issues, but that is not so. Biodiesel users can find their biodiesel blends absorbing more water than usual, which precipitates out of the solution upon temperature changes. Once you have an accumulated water layer, you have the potential for contamination with microbial colonies. And that brings a whole new problem for diesel and biodiesel users.

So we have the presence of biodiesel, and we have the fuel's affinity for water. Combine those two things with the change in the fuel's composition out of the refinery (fewer aromatic molecules), and the result is that today's fuels develop microbial contamination much more easily. This microbial contamination contributes to diesel fuel contamination not only through microbial breakdown of the fuel but also through contamination by biomass secretions from the microbes.

Ways To Remedy Diesel Fuel Contamination

The remedies for fuel contamination are not rocket science. We've done blog posts on them before, but since it's a major problem for users, it's always useful to repeat the information sometimes. When fuel handlers are surveyed on the issue of preventing fuel contamination issues, the common suggestions are usually the best:

1. Buy from reputable sources

To prevent the likelihood of microbe, water, or particulate contaminant problems from being passed on to you, the user. A reputable fuel distributor who turns over a higher fuel volume is more likely to be on top of preventing these problems.

2. Maintain your tanks

Tanks need maintenance to keep their integrity. You can treat the fuel to prevent water accumulation, but no fuel additive can overcome a rusty tank that allows rainwater to leak into the fuel inside after every storm.

3. Keep tanks full

This helps minimize the development of condensation.

4. USE A filtration system

When moving fuel, run it through a fuel filtration system.

5. Test Regularly for Microbes and Water

Regular fuel testing for microbes and water will help you stay on top of stored fuel problems. Tanks should be dipped monthly to monitor water phase levels. Biocides should be used every 90 days to prevent microbial contamination, a serious and costly problem if left unchecked.

You may be interested in these other posts:

microbe headaches

Low Sulphur Diesel Problems: Corrosion in Storage and Dispensing

Low Sulphur Diesel Problems: Corrosion in Storage and Dispensing

In 2006, the US Environmental Protection Agency (EPA) mandated the switch from Low Sulfur to Ultra Low Sulfur Diesel (ULSD). This was a reduction of...

Read More
Recognizing Diesel Fuel Algae

Recognizing Diesel Fuel Algae

The last decade, since 2014 when the complete transition of all off-road diesel fuel to ULSD was completed, has seen a dramatic rise across the...

Read More
Diesel Fuel Tank Corrosion: A New Culprit

Diesel Fuel Tank Corrosion: A New Culprit

Ever since the EPA mandated the introduction of ultra-low sulfur diesel (ULSD), fueling stations and stored fuel users have been consistently...

Read More