Petroleum-based ULSD is produced by removing sulfur during the oil refining process, through the process of hydrotreating. In this process, a heated mixture of petroleum feedstock (diesel) and hydrogen passes through a reactor with catalysts—substances that facilitate chemical reactions without being consumed by the reaction—to separate sulfur from hydrocarbon molecules.
Though it’s great for emissions, here are 3 essential things that ULSD is missing:
1) Biocide properties -- Sulfur is a natural biocide - it helps to prevent the growth of bacteria and fungus in stored diesel fuel. Microbes simply don't like to be around sulfur (then again, neither would we). Removing 98% of the sulfur as they do, takes away much of what prevents or slows the growth of existing microbes who otherwise would love to grow and thrive and feed off parts of the diesel fuel, provided there's water present in the tank (which there usually is). Water itself is another issue for diesel fuel. It acts differently in ULSD than in higher-sulfur version of diesel, causing greater problems in the engine, damaging injectors, and, of course, helps the fuel harbor microbes.
2) It lacks lubricity. ULSD is a very dry fuel, which means that it has a very low amount of lubricating properties. Removing the sulfur contributes to this, as hydrotreating destroys some of the essential organic parts of the diesel that otherwise would provide lubrication in the fuel. This lack of lubricity can cause premature failure of fuel pumps and injectors that normally rely on the diesel fuel for lubrication.
3) Poor Cold Flow properties—the process that refineries use to remove sulfur from diesel not only raises the fuel cloud point (the temperature at which the paraffin in the fuel changes from a liquid to a solid wax), but also can significantly lower the aromatic content of the fuel. As a result, when the paraffin changes to solid wax, the crystals are less likely to remain suspended or dissolved in the fuel. Instead, the wax crystals tend to precipitate out (they drop out faster the colder it gets) and accumulate in the fuel and in the bottom of the tank. As more crystals drop out, they stick together and get bigger. The solid wax crystals are then drawn into the fuel filter as soon as the pump system is activated, quickly plugging the fuel filter and shutting down the engine.
All of these issues can be addressed through cost-effective additization. For more information on supplementing your ULSD fuel to offset these down sides, please contact us.
Check out this related post: