<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=1663564727022060&amp;ev=PageView&amp;noscript=1">
Welcome {{contact.firstname}}

Advice on Buying Fuel

Posted by: Erik Bjornstad

Keeping ahead of the fuel problems that hit so many others can be as simple as just knowing how to buy fuel. Sounds elementary, doesn’t it? But common sense isn’t so common these days, so they say. There are some simple practices you can do to ensure the fuel you buy starts out and stays healthy for longer.

Know What You’re Getting

buying-fuel.jpgIt is always a best practice, when buying bulk fuels, to get the fuel specifications. Review these to make sure everything meets the minimum requirements. File the specifications away in case you need to refer to them later.

Pay attention, especially, to the cloud point and other documented cold weather specs.  This will be your key for planning possible cold flow treatment for the fuel.  Users up north know this is no joke.

Whether it’s #2 diesel or biodiesel or any other fuel, these specifications are the benchmark. Fuels are legally required to meet them, so having a COA on file is your insurance policy. It documents that the fuel started out in the correct condition.  Then it’s your job to keep it that way.

The Eyes Have It

While it’s essential to get a COA for any fuel drop, you don’t just rely on it as the end of the story.  It’s always a wise decision to do a visual inspection of the fuel you’re getting. As President Reagan used to say, 'trust, but verify'.

Draw a fuel sample yourself and check it for visual markers that something could be off.  The fuel should be clear and bright with no discernible trace of haze or suspended matter.  If the fuel looks off, think twice about accepting it.

Keeping It Clean On Your End

You don’t want to put clean fresh fuel into tanks full of water and sludge. That will undo the good work you did to make sure you were getting good fuel in the first place. So your ongoing job is to keep your fuel storage tanks free of water and contaminants over time, so that when you get a fuel drop, you won’t have any nasty surprises afterwards.  It may be a good idea to consult with a professional tank cleaner or fuel polishing expert to make this job easier for you.

Check out these related posts:


Learn more about our Fuel Tank Services



This post was published on December 24, 2015 and was updated on March 31, 2017.

Topics: Fuel and Tank Services